Beta stage blasters.

[Lein]

What tank is that?  BBBB?

[iamthatcat]

It's from an UMB I sacrificed a while back for another project. And it fits! I can't believe it.

[Techshooter]

Those pistols are as cool. I don't really know what I can say for Lein's, other than what I tell my friends. It's your gun, do it how you want to!!!. Imagine using those in pistol only rounds, that would be awesome!!!

[Lein]

Those pistols are as cool. I don't really know what I can say for Lein's, other than what I tell my friends. It's your gun, do it how you want to!!!. Imagine using those in pistol only rounds, that would be awesome!!!

At one point i was able to punch out 6 pumps w/ a 2 ft. Barrel while doing a pistol round with a friend.  He told me it was the worst Idea of his life.  And as Taerkitty says

Fugly is Feature

[iamthatcat]

Chopimigated BB DS

[Techshooter]

Thats pretty cool. It would be cool if you could get it small enough to look like a double barrel flintlock.

[iamthatcat]

The back's about as small as I can get it. There's still some choppy on the front though.

DB Flintlock... Hmmm, PJ idea!

[iamthatcat]

Reflex with chopped BB UMB guts. Uses 1/2 thinwall pvc and a slice of pvc coupler as a bushing for the pump. I would like to adjust the oprv as it can probably take a pump or 2 past 4. Dunno really if I'll keep up on this so a test trigger. Surprisingly solid to pump up. Everything is hotglued to one side.

[Techshooter]

Dude, I have a reflex shell and an UMB tank. I have to do this!

[iamthatcat]

I love making funky stuff from spares!


Tank expanded Big Blast re-shell to get in on the absolver fun!

[Nerf Doctor]

^That, is awesome. Probably the highest volume 4B ever. Should easily fire a 7-shot, maybe even a 19-shot.^
Been working on an air tank

This will most likely mount on my EPVAT Chimera after it's done, I've run out of my free check valves. Time for shopping for free samples!
My AT2K waiting for CPVC barrels

Should be done tomorrow.
AT3K, also waiting for some CPVC

Both have plugged pumps, but I haven't gotten to the goo gauges yet.
I would have 2) 2K's barrel ready, but I frigged up the other's seal. I'll eventually fix it, but right now my priority is getting as many things finished as possible. I have a small fight with some friends coming up Friday night, so I'm getting the stuff that's easiest to finish done.

[iamthatcat]

What kind of tank is that ?!?! OMG. I need a pressure gauge bad. Thanks for showing that. What parts are there? How did you make it? Tell me Tellme TELL ME EVERYTHING! Good Lord that looks like fun!

Lol I didn't have internet for a little while there and maybe wish I had read that comment^. I wound up making the tank as big as I could while keeping everything in the shell. Originally I wanted to integrate a springer inside the shell so the smaller tank would have been needed.



Going to Home Depot today. I am getting as many 3" endcaps as possible! Amazing work ND!

[Nerf Doctor]

What kind of tank is that ?!?! OMG. I need a pressure gauge bad. Thanks for showing that. What parts are there? How did you make it? Tell me Tellme TELL ME EVERYTHING! Good Lord that looks like fun!

Lol I didn't have internet for a little while there and maybe wish I had read that comment^. I wound up making the tank as big as I could while keeping everything in the shell. Originally I wanted to integrate a springer inside the shell so the smaller tank would have been needed.
img
Going to Home Depot today. I am getting as many 3" endcaps as possible! Amazing work ND!

I need to grab a better pic in the near future. The tank itself is an empty and sanded down fire extinguisher. The 2 main PVC pieces are a .75" threads to slip adapter, and a .5" cross. I sanded the cross until it fit in the adapter, and screwed the adapter into the extinguisher. I then took 3) .5" plugs, and drilled/tapped then for .25" threads. The top has a regulator and outlet, the side with just the barb is for the pump inlet, and the side with nothing is for a gauge for tank pressure. I plan on running 100psi in the tank, and regulating it down to around 30psi.

As far as your project, with that even bigger expanded tank, there's gonna be hella lot of air in there, but going from the back tanks to the front is going to be slow because of the little tubes. If it were me, I'd drill some hole in the tanks, and glue about 4 pieces of vinyl tubing going from the back original tank to the front tank. That would greatly improve flow.

Edit: My EPVAT Chimera is almost ready!

[Lein]

It's deer huntin' season boys, get out them shotgu-Nerf doctor, what is that?  That air tank won't hurt a fly!
*Nerf Doctor shoots lLein in the crotch*
Never mind, that'll take a deers head off.
*Nerf doctor shoots Lein in the head*
Better hang my head on the wall, it's useless now.

[Nerf Doctor]

^If I used slingshot weights......^
Anyway, scared some friends with it last night. Me, along with the other FFA officers from school, and one of our advisers, had a little nerf fight in the school after working on some national chapter stuff. I decided to show them some of my homemade and modded stuff. Needless to say, the 19-shot scared them.